I have tested, whether this external USB recording tool, works with my Samsung Galaxy Tab S Tablet, using an ‘‘ OTG adapter. The results were resoundingly affirmative.
In This Earlier Posting, I had tested the same USB Sound Card, with my Samsung Galaxy S6 Smart-Phone. At that time, an attempt also to use it with my Tab S tablet had failed. In order to get the to work with the Tab S, the following two conditions need to be fulfilled:
- The amount of current that the USB Slave Device may draw, needs to be reinforced, in principle, with a self-powered OTG adapter, or with a similar arrangement. The ‘‘ is Not a self-powered OTG adapter, and with it, the is bound to draw too much current, for the likes of the Tab S. It was after all meant as an audio workstation workhorse, and not as a replacement for a simple USB Microphone.
- The Master / Host Device, the Tab S, needs to have the correct drivers.
Condition (1) is something I was able to fulfill for now, in a roundabout way. I bought a ‘‘, with the part number ‘JUH340′. This is a self-powered hub by default, with its own power cord, and has Type A USB connectors up-stream and down-stream. Granted, it has a special up-stream cable, that connects to the hub with a special connector, just so that the user does not get this socket confused with the down-stream sockets. But then, the far side of that cable has a standard Type A USB jack.
This USB jack can be plugged, into the far side of the OTG adapter. Since the hub is self-powered, the current requirements of the are met by it, and not by the OTG adapter, and thus not by the micro-USB port on the Tab S, the latter of which now faces a minimum current load.