Understanding The Intricacies Of KDE Logic

In This Posting, I was describing a problem with my Linux laptop named ‘Klystron’, in which the laptop would take itself off my WiFi, apparently every time I closed the lid.

In the short term, there was a solution to this problem. I was able to go into my KDE Power Management Settings, where I had set the action on closing the lid to “Lock Screen”, and I was able to change this setting to “Do Nothing”. The suspicion had never occurred to me, that there could be two distinct behaviors:

1) After (x) minutes, the screensaver can come on, and if the attempt is made to interrupt the screensaver after (y) additional seconds, that screensaver can ask the user for his password.

2) The user can ask KDE to “Lock The Screen”.

According to the way KDE works, (1) and (2) are as different as Night and Day. So apparently, Locking The Screen is also supposed to mean, Disconnect From WiFi. But the screensaver asking the user for his password to stop, does not mean Disconnecting The WiFi.

Live and Learn.

And actually, one main reason for which I do close the lid usually, is the fact that the laptop is more protected from dust etc., with the lid closed.

Dirk

(Edit : ) This laptop setup uses Network Manager. So just this afternoon I left-clicked on the Network Manager icon while connected to my home WiFi, and then drilled deeper into its GUI, to adjust which settings would be displayed as additional information about the network I am connected to. Network Manager is somewhat flexible in this GUI layout adjustment, but does not really allow settings to be fine-tuned in the same way.

Some KDE setups use ‘WICD‘ instead of ‘Network manager‘.

What I saw, was that there was no specific parameter to display, for whether a WiFi network should disconnect, on locking the desktop.

The only relevant WiFi-related detail I was able to add to the display, was “WiFi Band”, which could plausibly have complemented “WiFi Security”, which was already included. For my home access point, WiFi Band now displays “b/g“, as a result of further troubleshooting steps of mine.

I have since disabled 802.11n from the kernel module…

This means in practice, according to my logic, that the behavior I described in this posting, of cutting out when I close the laptop lid, cannot be deliberate. If it was deliberate, it would also be something which can be configured differently. And thus, this can also not be due to any translation error.

Therefore, this is a bug, and one I can now reproduce any time I want to.

 

Print Friendly, PDF & Email

One thought on “Understanding The Intricacies Of KDE Logic”

Leave a Reply

Your email address will not be published. Required fields are marked *

Please Prove You Are Not A Robot *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>