About +90⁰ Phase-Shifting

I have run into people, who believe that a signal cannot be phase-advanced in real-time, only phase-delayed. And as far as I can tell, this idea stems from the misconception, that in order for a signal to be given a phase-advance, some form of prediction would be needed. The fact that this is not true can best be visualized, when we take an analog signal, and derive another signal from it, which would be the short-term derivative of the first signal. ( :1 ) Because the derivative would be most-positive at points in its waveform where the input had the most-positive slope, and zero where the input was at its peak, we would already have derived a sine-wave for example, that will be phase-advanced 90⁰ with respect to an input sine-wave.


But the main reason this is not done, is the fact that a short-term derivative also acts as a high-pass filter, which progressively doubles in output amplitude, for every octave of frequencies.

What can be done in the analog domain however, is that a signal can be phase-delayed 90⁰, and the frequency-response kept uniform, and then simply inverted. The phase-diagram of each of the signal’s frequency-components will then show, the entire signal has been phase-advanced 90⁰.


(Updated 11/29/2017 : )

Continue reading About +90⁰ Phase-Shifting