Measurement of 18650 Batteries and Conclusion

I have now received my “9900mAh, 3.7V” batteries, and their bundled “4.2V” charger, which I first wrote about in this earlier posting. After receiving a full charge, their measured voltage while still inserted was 4.215V , immediately after removed at no load 4.195V , and after standing for 30 minutes, at no load, 4.138V . When new they require approximately 4h + 5min to charge.

I have to conclude that these batteries do not contain any series-connected, internal, over-voltage-protection chip. They seem to be based on the Layered Lithium-Manganese-Oxide:┬áLi2MnO3 . They differ from the “3400mAh, 3.7V” variety, in that the other kind are based on the Spinel Lithium-Manganese-Oxide: LiMn2O4 .

I must only use this charger, with the batteries it shipped with.

Continue reading Measurement of 18650 Batteries and Conclusion