As early as This posting, I had experimented with Bluetooth Headphones, that were specifically designed to handle High-Fidelity sound, for continuous music playback. But the fact is, that in the past 2 years, 3 such headphones failed me. The most-recent, ‘Infinim HBS-910′ set also failed on me, mechanically, only earlier this month, which effectively means that in total, if I continued doing things this way, I’d continue to burn through my money too fast.
So the course which I’ve chosen to go instead, is to use wired headphones, but to buy slightly-higher-quality, wired headphones, that are compatible with an Android device.
There once existed the observation, that the buttons on certain headphones would only work with iOS devices, and the buttons on other headphones would only work on Android-based devices. Interestingly enough, If the packaging doesn’t specify, then today, most headphones will work on either devices. My new Headrush HRB 3012 set has buttons which my Samsung Galaxy S6 recognizes.
(Edit 07/14/2018 : )
About these new ‘Headrush HRB 3012′ headphones:
Their cord consists of a ribbon, instead of the older-type, standard elastic, round-cross-section cords, which I was used to. I think that the current, ribbon design is a clever way to minimize any injuries which a headphone-cord can sustain, let’s say because users often pull the headphones out of their socket, by the cord instead of by the jack. The only way I foresee the ribbon-design getting injured, would be if somebody got a knot into it – and was then foolish enough to try to undo the knot, by just pulling it tight. And, because the ribbon tends to be more stiff, undoing knots correctly, has actually become easier.
There is one little issue with these though. Like the designs that I was used to, this set of headphones has a bump in its ribbon, which splits into two ribbons: One to the left ear, and one to the right ear. And in the segment of ribbon to the right ear, there is a remote-controller-button, inline-mike bump. When all the ribbons are (untwisted) parallel, and at right-angles to the wearer, the ribbon that goes to the right ear, has its mike facing away from the wearer, and has the controller-buttons facing towards the wearer.
As a result, I find myself twisting or rotating the right-hand ear-phone 360⁰ at the end of its ribbon-segment, thereby turning the inline-bump 180⁰, so that the inline-mike is again, facing towards me.